Accsoon has released Frame.io C2C support for their SeeMo and SeeMo Pro video capture devices. These devices allow you to record, stream, and monitor HDMI or SDI cameras right on your iOS device. With C2C now integrated, send your recordings straight to Frame.io.
Use this guide to quickly setup your Accsoon SeeMo or SeeMo Pro for C2C with settings recommended by Frame.io.
What you'll need
An Accsoon SeeMo or SeeMo Pro device
A supported iOS device (iPhone 8 or newer; iPad 6th Gen or newer; iPad Pro 9.7 inch, iPad Pro 10.5 inch, iPad Pro 11 inch, iPad Pro 12.9 inch; iPad Air 3rd Gen or newer; iPad Mini 5th Gen or newer)
Accsoon SEE iOS app installed on iOS device
HDMI or SDI cable*
NP-F battery or power source
A connection to the internet (WiFi or cellular)
A Frame.io account with permissions to add cloud devices to projects
A Frame.io project with C2C Connections enabled
*Note: only the SeeMo Pro supports SDI video
Refer to your SeeMo's instructions on powering up and connecting your HDMI or SDI camera.
Connect your iOS device to your SeeMo or SeeMo Pro and launch the Accsoon SEE app.
Tap the Frame.io logo on the screen to open the Frame.io menu.
In the Frame.io menu, tap “Login”.
Enter your account credentials then click “Allow” when prompted by the app to grant upload permissions for Frame.io.
Once logged in, select which Frame.io account you would like to work in, followed by which project within the selected account you would like to upload assets to.
In the Frame.io menu, set RECORD UPLOAD to ON and choose your desired setting for UPLOAD MODE and CELLULAR DATA UPLOADING. The REAL-TIME option for UPLOAD MODE will upload your recordings to Frame.io while they're being recorded.
Tap the settings icon in the lower right corner of the screen to open the encoder settings. Adjust these to match your workflow. For uploading over cellular connections, we recommend a bitrate between 3 and 5Mbps.
Where do I find the recordings on my device?
Recordings from the Accsoon SEE app will appear in your device's camera roll.
Where do I see my upload progress?
If REAL-TIME is selected for UPLOAD MODE, you will see a queue number and progress bar around the Frame.io logo on the screen. You can also tap the Frame.io logo and go to the UPLOAD tab of the Frame.io window to see more information about the current uploads.